| DIMENSIONS |
314 x 306 x 166 mm (with rubber boot)
12.36” x 12.04” x 6.53” (with rubber boot) |
| WEIGHT |
6.3 kg (13.88 lb) full option configuration
6.5 kg ( 14.33 lb) full option configuration (+RAEMet) |
| GAS SENSORS SLOTS |
up to 7; see Sensor list |
| ADDITIONAL SENSORS |
Gamma;
RAEMet (Wind Speed, Wind Direction, Temperature & Humidity) |
| GPS |
Standard equipment in every unit |
| BATTERY |
Rechargeable 7.2 V / 10 Ah Li-ion battery pack with built-in charger
Alkaline Battery Adapter |
| OPERATING HOURS |
~20 hours with wireless connectivity on Li-ion battery pack
~12 hours with wireless connectivity on Alkaline battery adapter |
| Specification at room temperature (20°C) |
| DISPLAY |
Large 240 x 320 pixel LCD backlit display |
| 64 x 85 mm / 2.5” x 3.33” |
| KEYPADS |
3 operation and programming keys |
| ALARMS |
Multi-tone 108 dB buzzer @ 3.3 ft / 1 m, Bright LED 360 degree
view and on-screen indication of alarm conditions |
| Additional diagnostic alarm and display message for low battery |
| Wireless connectivity alarm |
| DATA LOGGING |
Continuous data logging (90 days for 7 gas sensors, 1 Gamma
sensor, 1 RAEMet (wind speed & direction, temp and RH), and GPS
at 1 min intervals, 24/7) |
| DATA STORAGE |
24M bytes (memory full action: stop when full or Wrap around) |
| DATA INTERVAL |
User-configurable from 1 to 3,600 sec |
| WIRELESS |
Bluetooth Low Energy module (BT4.0) and GPS |
Primary radio module:
– Long range ISM License Free 900 MHz or 2.4 GHz radio
– IEEE 802.11 b/g Wi-Fi |
Secondary radio module:
Short Range IEEE 802.15.4 900 MHz or 868 MHz Mesh Radio |
Wireless range
:
Up to 2 miles (3 km) for ISM 900 MHz;
Up to 1.2 miles (2 km) for ISM 2.4 GHz;
Up to 330 ft (100m) for Wi-Fi;
Up to 660 ft (200m) for Mesh secondary radio;
Up to 15 ft (5m) for BLE. |
| Wireless Approval: FCC Part 15, CE R&TTE, Others |
| COMMUNICATION |
Communicates to ProRAE Studio II via USB cable to PC; |
Wireless data and alarm status transmission via Wi-Fi or ISM
modem; |
Act as gateway to connect up to 8 remote instruments
(using secondary radio module) |
| SAFETY CERTIFICATION |
US / Canada: Class 1, Division 2 Groups A, B, C, D |
| SAMPLING PUMP |
Built-in pump, typical flow rate 450 cc/min |
| TEMPERATURE |
-20 °C to +50 °C / (- 4 °F to +122 °F) |
| HUMIDITY |
0% to 95% relative humidity (non-condensing) |
| INGRESS PROTECTION (IP) |
IP 65 |
| PERFORMANCE TESTS |
MIL-STD-810G and 461F |
| LEL CSA C22.2No. 152, ISA-12.13.01 |
| WARRANTY |
Four years for O2 Liquid Oxygen sensors
Three years for CO, and H2S sensors
Two years for non-consumable components, catalytic LEL sensor and
10.6eV 7R+ PID lamp
One year on all other sensors, battery, and other consumable parts
Six months for 9.8eV lamp PID sensor |
