Fixed Gas Detector
Fixed Gas Detector
-
SKU:
Crowcon FGard H2 Flame Detector
- Gas Detection Class Fixed
- ATEX ATEX
- Power Consumption 3 W minimum (without heater), 12 W maximum (with heater).
- Brand Crowcon
View product
-
SKU:
Crowcon FGard IR3 Flame Detector
- Gas Detection Class Fixed
- ATEX ATEX
- Power Consumption 3 W minimum (without heater), 15 W at 32 Vdc with heater on maximum.
- Brand Crowcon
View product -
SKU: FGARDIR3
Crowcon FGard UVIR Flame Detector
- Gas Detection Class Fixed
- ATEX ATEX
- Power Consumption 3 W minimum (without heater), 15 W maximum (with heater).
- Brand Crowcon
View product -
SKU: GMS-BDL-1
Crowcon Gasmaster Control Panel
- Gas Detection Class Fixed
- ATEX ATEX
- Display LCD display
- Channels 4 channels
- Power Consumption 100-240Vac 50-60Hz or 20-30Vdc, 60W max
- Brand Crowcon
View product -
SKU: FS24XP-AMGXX
Honeywell FS24X Plus Triple IR Flame Detector
- Gas Detection Class Fixed
- ATEX ATEX
- Power Consumption 1.8 Watts (Nominal) 2.4 Watts (Alarm) 12 Watts (max) = with heater ON 100% duty cycle.
- Gas Type Jet Fuel / Kerosene, Methane - CH4, Methanol - CH3OH, Propane - C3H8, Butane - C4H10, Diesel Fuel, Ethanol - C2H6O, Heptane - C7H16, Hydrogen - H
- Brand Honeywell
View product -
SKU: FSL100-UV, FSL100-UVIR and FSL100-IR3
Honeywell FSL100 Flame Detectors
- Gas Detection Class Fixed
- ATEX ATEX
- Power Consumption 10-28 VDC (12-24 VDC nominal)
- Brand Honeywell
View product -
SKU: SLX-EDGE
Honeywell Searchline Excel™ Edge Fixed Gas Detector
- Gas Detection Class Fixed
- ATEX ATEX
- Temperature -55°C to +75°C (-67°F to +167°F)
- Power Consumption 24 Vdc nominal (18 Vdc to 32 Vdc)
- Output 4–20 mA with HART®, Fault relay, Alarm 1 relay, Alarm 2 relay, Modbus, Bluetooth® (range up to 20 m (66 ft), depends on mobile device and environmental conditions)
- Gas Type Pentane - C5H12, Propane - C3H8, Butane - C4H10, Ethane - C2H6, Hexane - C6H14, Propylene, Methane - CH4, Hydrocarbon gases & vapours
- Brand Honeywell
View product -
SKU:
Honeywell Searchzone Sonik Fixed Gas Detector
- Gas Detection Class Fixed
- ATEX ATEX
- Temperature -55° C to +75° C (-67 °F to +167 °F)
- Power Consumption 24Vdc nominal (18 Vdc to 32 Vdc)
- Output Modbus RTU RS-485. HART® with handheld communicator or hardwired. Bluetooth® to smartphone or tablet.
- Display High Visibility LED; green/yellow/red/blue to indicate detector status.
- Brand Honeywell
View product -
SKU: S3KUS3
Honeywell Series 3000 MkIII Gas Detector
- Gas Detection Class Fixed
- ATEX ATEX
- Gas Type Ozone - O3, Chlorine - Cl2, Phosphine - PH3, Chlorine Dioxide - ClO2, Sulfur Dioxide - SO2, Hydrogen - H, Hydrogen Chloride - HCl, Hydrogen Cyanide, Hydrogen Fluoride - HF, Ethylene oxide - ETO, Hydrogen Sulfide - H2S, Nitrogen Dioxide - NO2, Nitric Oxide - NO, Ammonia - NH3, Oxygen - O2, Carbon Monoxide - CO
- Brand Honeywell
View product -
SKU: XNX
Honeywell XNX fixed gas detector
- Gas Detection Class Fixed
- ATEX ATEX
- Power Consumption XNX used with: electrochemical sensor: 6.2 watts; millivolt (catalytic bead or IR cell): 6.5 watts
- Cable Entry 5 conduits/cable entries – (2 right, 2 left, 1 bottom) Available in ¾” NPT, or M25
- Display Backlit LCD
- Gas Type Carbon Monoxide - CO, Combustible gases - 0 to 100% LEL, Flammable - LEL, Methane - CH4
- Brand Honeywell
View product -
SKU: MIDAS S2-E
Midas S2 Fixed Gas Detector
- Gas Detection Class Fixed
- ATEX ATEX
- Display Large, bright, and rich TFT color LCD and extensive viewing angle
- Temperature 0°C to 40°C (32°F to 104°F)
- Output 4-20mA analog output with fault and event reporting
- Gas Type Boron Trichloride - BC13, Hydrogen Sulfide - H2S, Dichlorosilane - H2Cl2Si, Methane - CH4, Hydrogen Bromide - HBr, Ozone - O3, Disilane - Si2H6, Sulfur Dioxide - SO2, Nitrogen Trifluoride - NF3, Methyl Fluoride - CH3 F, Ammonia - NH3, Silane - SiH4, Carbon Monoxide - CO, Chlorine - Cl2, Hydrogen - H, Hydrogen Chloride - HCl, Propylene, Hydrogen Fluoride - HF
- Brand Honeywell
View product -
SKU: 10087406
MSA Chillgard M-100 Fixed Gas Detector
- Gas Detection Class Fixed
- ATEX ATEX
- Temperature 0° to 65°C (32° to 150°F)
- Display 3 LED’s to indicate power, fault and alarm
- Output 4–20 mA sourcing, <500 Ω load 2–10 V, 10 kΩ load RS-485 ModBUS RTU
- Gas Type R-22 in Nitrogen, R-123 in Nitrogen, R-134a in Nitrogen, R-404a in Nitrogen
- Brand MSA
View product -
SKU:
OLCT 10 and OLC 10 Fixed Gas Detectors
- Gas Detection Class Multi Gas, Fixed
- ATEX ATEX
- Temperature -10 to + 45 °C
- Output Normal operation 4-20 mA (Fault 23.2 mA)
- Gas Type Butane - C4H10, Combustible gases - 0 to 100% LEL, Methane - CH4, Natural Gas or H2, Propane - C3H8
- Brand Oldham
View product -
SKU: 14082
OLCT 60 Industrial Gas Detector
- Gas Detection Class Fixed
- ATEX ATEX
- Temperature -20 to +55 (Explosive gases)
- Output 0-23 mA (4-20 mA reserved for measurement)
- Gas Type Explosive Gas (Ex), Hydrogen Sulfide - H2S, Infrared, Nitric Oxide - NO, Arsine - AsH3, Ammonia - NH3, Oxygen - O2, Ethylene oxide - ETO, Carbon Dioxide - CO2, Ozone - O3, Carbon Monoxide - CO, Phosphine - PH3, Chlorine - Cl2, Sulfur Dioxide - SO2, Chlorine Dioxide - ClO2, Hydrogen - H, Phosgene - COCl2, Hydrogen Chloride - HCl, Hydrogen Cyanide, Hydrogen Fluoride - HF
- Brand Oldham
View product -
SKU: DF-TV7
Oldham DF-TV7 IR3 Fixed Flame Detector
- Gas Detection Class Fixed
- ATEX ATEX
- Power Consumption 2W normal; 4W during test
- Brand Oldham
View product -
SKU: DF-TV7-V/IR2
Oldham MultiFlame DF-TV7-V/IR2
- Gas Detection Class Fixed
- ATEX ATEX
- Power Consumption 2W normal, 4w during test
- Brand Oldham
View product
